electronic equipment
Ag-Sintering - Cu-Sintering Technology

Pressure sintering (silver sintering or in the next future copper sintering too) is a die attach heat treatment process applied to a powdered material in order to give it higher strength, integrity and conductivity.

Scroll down

Ag / Cu Pressure Sintering Gamma

Pressure sintering (silver sintering or in the next future copper sintering too) is a die attach heat treatment process applied to a powdered material in order to give it higher strength, integrity and conductivity.
Pressure sintering is now considered the most reliable technology for power electronics packaging. The proven advantages of sintering technology are the following ones:
  • -   Highest melting temperature >400°C
  • -   Best thermal conductivity coefficient >150 W/(m K)
  • -   Best electrical conductivity coefficient
  • -   Best result on lifetime testing

Considering electronic devices continue to shrink in size and at the same time increase in power, the trend toward higher power density is fast increasing. Volume power density is a crucial consideration where space is constrained or where maximum output is needed in a fixed space. There is a constant research to reduce as much as possible the power module size with new technology generations.

Thanks to these features, pressure Ag sintering is a consolidate bonding solutions to sinter dies and clips on DBC, DBA, AMB, frames and moreover, to sinter package on heatsink.
Due to this excellent bonding performance, pressure sintering is also the perfect bonding solution for:
  • -   Double side cooled package (high performance inverter fort new power generation of vehicles);
  • -   Place sensor;
  • -   Wafer lamination and wafer sintering;

AMX worldwide patented a unique sintering tool for its sintering press, the so called "Micro-Punch" able to press individually and with a dedicated pressure every single component on the substrate (thermistor, IGBT, mosfet, die, chip…).
AMX Micro Punch tool grants an even pressure and most of all definitely avoid the following high value problems that usually occur: die crack, tilting, delamination and voids.
The Micro-Punch tool has no limits in dies number and positioning, it can adapt itself to every DBC size and configuration, and can press independently the thinnest and smallest dies even if they are very close one another.

Thanks to our patented pressure sintering technology, we are also able to have the complete traceability of the total pressure applied on the dies. Key point for having a complete reliable and repeatable system.

Our experienced R&D team can support you choosing the best solution for your specific silver sintering and copper sintering applications, choosing from a wide variety of sintering presses. AMX sintering press range covers all the customers’ needs: R&D, small batches, low volume and high volume of productions.
Our patented technology

Discover AMX Automatrix Micro-Punch System

Discover AMX Automatrix Micro-Punch System

AMX Automatrix worldwide patented a unique sintering tool for its sintering press, the ‘Micro-Punch’ able to press individually and with a dedicated pressure every single component on the substrate.

Discover more
Discover AMX Automatrix Micro-Punch System
Clean Room & Prototyping
More info